|
Can't
get it locally? |
Procureit is your source for Unifrax, Amisil, Amasil, Millboard, Armaglas,
thermal supplies, thermal insulation, fabricated thermal insulation products,
calcium aluminate cement, ciment fondu, gaskets, packings & seals, composite
materials, steam & boiler products, instrumentation & controls, gauges pressure
& temperature, heat resistant materials, ceramic & fibreglass products, expansion
joints & hose assemblies, thermal & electrical insulation, industrial materials.
|
Armasil AS18-600 Cloth
|
|
|
Description
|
Armasil fabrics are a continuous filament, amorphous silica product which when chemically treated results in essential pure silica. The AS series is designed to provide thermal insulation for extreme temperatures. It is an excellent product for heat treating, insulation blankets, furnace curtains and stress relieving pads
|
| Physical Properties |
Coating..................................Standard |
|
Armasil AS36-1200 Cloth
|
|
|
Description
|
Armasil fabrics are a continuous filament, amorphous silica product which when chemically treated results in essential pure silica. The AS series is designed to provide thermal insulation for extreme temperatures. It is an excellent product for heat treating, insulation blankets, furnace curtains and stress relieving pads
|
| Physical Properties | Coating..................................Standard Colour...................................Gold Width.....................................914mm Thickness, Nominal.................1.5mm Weight, Nominal.....................1200g/m2 Temperature Rating................1250 degC Roll Length.............................45.7m Also available in silicone coated or with an adhesive backing. Armasil products are all non-asbestos. |
|
Armasil AR18-600 Cloth
|
|
|
Description
|
ARMASIL AR18-600 Cloth ARMASIL AR Series is essentially a pure Silica but has a special protective coating making it more abrasion resistant. AR series is designed for welding purposes and protection and has great seam strength. AR fabrics are excellent for fabricating such as welding blankets, insulation pads and curtains.
|
| Physical Properties | Coating.....................Abrasive Resistant Colour......................Orange Width.......................914mm Thickness, Nominal...AR18 0.8mm Weight, Nominal.......AR18 600g/m2 Temperature Rating...............1250 degC Roll Length............................45.7m Conforms to the following Military Specifications: MIL-C-24576Type1 Armasil
products are all non-asbestos |
|
Armasil AR24-800 Cloth
|
|
|
Description
|
ARMASIL AR24-800 Cloth ARMASIL AR Series is essentially a pure Silica but has a special protective coating making it more abrasion resistant. AR series is designed for welding purposes and protection and has great seam strength. AR fabrics are excellent for fabricating such as welding blankets, insulation pads and curtains.
|
| Physical Properties | Coating.....................Abrasive Resistant Colour......................Orange Width.......................914mm Thickness, Nominal...AR24 1.0mm Weight, Nominal.......AR24 800g/m2 Temperature Rating...............1250 degC Roll Length............................45.7m Conforms to the following Military Specifications: MIL-C-24576Type1 Armasil
products are all non-asbestos |
|
Armasil AR36-1200 Cloth
|
|
|
Description
|
ARMASIL AR36-1200 Cloth ARMASIL AR Series is essentially a pure Silica but has a special protective coating making it more abrasion resistant. AR series is designed for welding purposes and protection and has great seam strength. AR fabrics are excellent for fabricating such as welding blankets, insulation pads and curtains.
|
| Physical Properties | Coating.....................Abrasive Resistant Colour......................Orange Width.......................914mm Thickness, Nominal...AR36 1.5mm Weight, Nominal.......AR36 1200g/m2 Temperature Rating...............1250 degC Roll Length............................45.7m Conforms to the following Military Specifications: MIL-C-24576Type1 Armasil
products are all non-asbestos |
|
Armasil AT Silica Tapes
|
|
| Description |
AMASIL AT Tapes have the same characteristics as the AS Series with an additional pressure sensitive adhesive backing. The AT tape is designed for extreme temperatures and is used to protect hydraulic hoses, motor and electric cables.
|
| Physical Properties | Coating.....................Adhesive Colour......................Gold Width....................50, 100, 125 & 150mm Thickness, Nominal...1.5mm Weight, Nominal.......AR36 1200g/m2 Temperature Rating...............1250 degC Roll Length............................45.7m Conforms to the following Military Specifications: MIL-C-24576Type1 Armasil products are all non-asbestos |
|
Armatex Fabrics
|
|
|
Description
|
ARMATEX SAF-16 Cloth Armatex fabric coated one side with a silcone rubber based compound. Armatex SAF-16 is an excellent product for pad and cover fabrication where water, oil or weather resistance is required.
|
| Physical Properties |
Coating.............................Cured silicone based rubber Weight, nominal.................550g/m2 Roll length..........................45.7m Excellent protection against water penetration |
|
Armatex Fabrics
|
|
|
Description
|
ARMATEX SAF-18 Cloth Armatex fabric coated both sides with a silcone rubber based compound. Armatex SAF-16 is an excellent product for pad and cover fabrication where water, oil or weather resistance is required.
|
| Physical Properties |
Coating.............................Cured silicone based rubber Weight, nominal.................550g/m2 Roll length..........................45.7m Excellent protection against water penetration |
|
Armatex Fabrics
|
|
| Description |
ARMATEX SAF-22 Cloth Armatex fabric coated both sides with a silcone rubber based compound. Armatex SAF-22 is an excellent product for weather resistant pad cloth, light spark and splatter protection or equipment covering.
|
| Physical Properties |
Coating.............................Cured silicone based rubber Weight, nominal.................760g/m2 Roll length..........................45.7m Excellent protection against water penetration |
|
Armatex Fabrics
|
|
|
Description
|
ARMATEX SRF-32 Cloth An Armatex 1090g fiberglass fabric coated both sides with a silcone rubber based compound. Armatex SRF-32 is designed for continuous use at temperatures up to 538 degC and short excursions up to 1000 degC. However, at these temperatures the silicone coating will dissipate. SRF-32 is an excellent product for welding blankets, protection of equipment or personnel, heat shield and expansion joints.
|
| Physical Properties |
Coating.............................Cured silicone based rubber Weight, nominal.................1090g/m2 Roll length..........................45.7m Excellent protection against water penetration |
|
Armatex Fabrics
|
|
|
Description
|
ARMATEX SAF-32A Cloth An Armatex 1090g fiberglass fabric coated both sides with a silcone rubber based compound. Armatex SAF-32A is designed for continuous use at temperatures up to 538 degC and short excursions up to 1000 degC. However, at these temperatures the silicone coating will dissipate. SRF-32 is an excellent product for welding blankets, protection of equipment or personnel, heat shield and expansion joints.
|
| Physical Properties |
Coating.............................Cured silicone based rubber Weight, nominal.................1090g/m2 Roll length..........................45.7m Excellent protection against water penetration |
|
Armatex Fabrics
|
|
|
Description
|
ARMATEX SWF-45 Cloth An Armatex 1530g fiberglass fabric coated both sides with a silcone rubber based compound. Armatex SWF-45 is designed for continuous use at temperatures up to 538 degC and short excursions up to 1000 degC. However, at these temperatures the silicone coating will dissipate. SWF-45 is an excellent product for gaskets and expansion joints
|
| Physical Properties |
Coating.............................Cured silicone based rubber Weight, nominal.................1090g/m2 Roll length..........................45.7m Excellent protection against water penetration |
|
Armatex Fabrics
|
|
|
Description
|
ARMATEX SRF-53 Cloth An Armatex 1800g fiberglass fabric coated both sides with a silcone rubber based compound. Armatex SRF-53 is designed for continuous use at temperatures up to 538 degC and short excursions up to 1000 degC. However, at these temperatures the silicone coating will dissipate. SRF-53 is an excellent product for gaskets and expansion joints
|
| Physical Properties |
Coating.............................Cured silicone based rubber Weight, nominal.................1090g/m2 Roll length..........................45.7m Excellent protection against water penetration |
|
Armatex Fabrics
|
|
|
Description
|
ARMATEX TAF-18 Cloth Armatex TAF-18 is a PTFE coated/impregnated fiberglass cloth with PTFE coating on both sides of the fabric. The formulated PTFE compound provides improved water, oil, chemical and abrasion resistance over uncoasted fabric while still offering temperature resistance up to 288 degC
|
| Physical Properties |
Coating.............................PTFE (Teflon) Weight, nominal.................600g/m2 Roll length..........................45.7m Excellent protection against water penetration |
|
Armaglas Rewettable Cloth
|
|
|
Description
|
ARMAGLAS Rewettable Cloth
A Fibreglass fabric with a built in adhesive, completely inorganic, that impregnates the fabric throughout. The adhesive materials are water dispersible and the inorganic composition, reduces chances of fire to practically zero. Application is simple, lagging is dipped in water and applied. The adhesive is utilised as an impregnation, not a coating and therefor either side can be used. The product has an extremely low chloride content making it useful where corrosion on stainless steel pipes is a factor as well as excellent adaptability to lagging elbows, T-joints and valves.
|
| Physical Properties | Coating............................Inorganic
adhesive Colour..............................White Width..............................1520 mm Thickness, Nominal..........0.75 mm Weight, Nominal.............500g/m2 Temperature Rating........Base fabric 538 degC Roll Length......................45.7 m Conforms to Military specifications MIL-C-24244 Corrosion & Chloride requirement and MIL-C-20079G General specification for lagging as well as USCG Specification 164009 for incombustible materials ARMAGLAS products are all non-Asbestos
|
|
Armaglas 2025 Cloth
|
|
|
Description
|
ARMAGLAS 2025 Cloth
A 600g/m2 fiberglass fabric, plain weave and heat cleaned which removes all organic properties to make the cloth clean and easier to handle with minimal dust. Armaglas 2025 is recommended for pads and jacketing
|
| Physical Properties | Colour..............................Beige Width..............................1520 mm Thickness, Nominal..........0.76 mm Weight, Nominal.............600g/m2 Temperature Rating.........538 degC Roll Length......................45.7 m Conforms to Military specifications MIL-C-20079 TYPE 1 CLASS 9 ARMAGLAS products are all non-Asbestos
|
|
Armaglas Vextra 2025 Cloth
|
|
|
Description
|
ARMAGLAS Vextra 2025 Cloth
A Fibreglass fabric coated both sides with vermiculite a 100% inorganic, chemically inert, non combustible, odourless and smokeless compound. Vextra is designed to operate up to 815 degC and short term to 1050 degC. Armaglas Vextra 2025 is recommended for welding blankets, curtains, insulation pads and jacketing.
|
| Physical Properties |
Coating............................Vermiculite ARMAGLAS products are all non-Asbestos
|
|
Armaglas Vextra 800 Cloth
|
|
|
Description
|
ARMAGLAS Vextra 800 Cloth
A plain weave Fibreglass fabric coated both sides with vermiculite a 100% inorganic, chemically inert, non combustible, odourless and smokeless compound. Vextra is designed to operate up to 815 degC and short term to 1050 degC. Armaglas Vextra 800 is used for welding blankets, stress relieving pads, curtains, pipe wrapping etc.
|
| Physical Properties |
Coating............................Vermiculite ARMAGLAS products are all non-Asbestos
|
|
Armaglas Vextra 1190 Cloth
|
|
|
Description
|
ARMAGLAS Vextra 1190 Cloth
A plain weave Fibreglass fabric coated both sides with vermiculite a 100% inorganic, chemically inert, non combustible, odourless and smokeless compound. Vextra is designed to operate up to 815 degC and short term to 1050 degC. Armaglas Vextra 800 is used for welding blankets, stress relieving pads, curtains, pipe wrapping etc.
|
| Physical Properties |
Coating............................Vermiculite ARMAGLAS products are all non-Asbestos
|
|
Armaglas AL1300 Cloth
|
|
|
Description
|
ARMAGLAS AL1300 Cloth
A 500g/m2 aluminised fiberglass fabric laminated on one side. A flexible lightweight fabric with excellent thermal reflective properties. Armaglas AL1300 is recommended for reflective curtains, shields, protective clothing etc
|
| Physical Properties |
Coating............................Mylar ARMAGLAS products are all non-Asbestos
|
|
Armaglas AL2025 Cloth
|
|
|
Description
|
ARMAGLAS AL2025 Cloth
A fiberglass fabric with a layer of aluminium foil laminated onto one side. Armaglass AL2025 is recommended for vapour barriers, reflective curtains, and for spray shields for flanges on board ships
|
| Physical Properties |
Coating............................Aluminium ARMAGLAS products are all non-Asbestos
|
|
Armaglas Kevlar KV17 Cloth
|
|
| Description |
Armaglas Kevlar KV17 580g/m2 Cloth are produced from blended yarns of
Kevlar and glass fibers. The blend combines the wear resistance of fiberglass
with the tensile strength of Kevlar to produce products with good strength
and abrasion resistance at temperatures to 345 degC. Strength and dimensional
stability are excellent while weight is low. KV17 textiles are especially
suited for use in heat shields, curtains, and various insulating applications.
|
| Physical Properties |
Colour...................................................Light Yellow |
|
Armaglas Fibreglass Industrial
textiles
|
|
| Description |
Armaglas Fiberglass Industrial textiles are manufactured from fibreglass yarn capable of resiting heat up to 538 degC. Available as Tape, sleeving and rope, Armaglas textiles are either woven, knitted or braided to meet a wide variety of end uses. Fibreglass textile product provide the advantages of asbestos products without the risk of use. They will not burn, smoulder, shrink, rot or mildew. They have high dielectric strength, maintain a large measure of tensile strength at elevated temperatures, and are highly resistant to most chemicals. |
| Average Physical Properties of Fibre |
Composition E-glass |
| Size Range |
Tape Woven 25-150mm & 1.5-6.0mm thick Tape Knitted 12-150mm & 2.0-6.0mm thick Sleeving Braided 12-90mm & 1.5mm thick Sleeving Knit 12-90mm & 2.0-6.0mm thick Rope Knit 3mm-40mm |
|
Millboard
|
|
| Description |
MILL BOARD |
| Size Range | Available in 1.5mm, 2mm, 3mm, 5mm, 6mm, 10mm
and 12mmm thick. Standard Sheet Size 1000mm x 1000mm |
| Typical Applications | Lining Furnaces Refractory applications |
|
Duraboard
|
|
| Description |
Duraboard Temperature range |
| Size range |
Duraboard Range of thickness from 5 - 75mm |
| Typical Applications | Furnace, Kiln and Boiler Hotface insulation Back up insulation for hard refractory Glass slumping applications Expansion joint gasketing Launder back up insulation |
|
Insulfrax
|
|
| Description |
Insulfrax Boards |
| Size Availability | Please contact us for details of size and availability |
| Typical Applications | Rigid high temperature gaskets and seals Domestic boiler heat exchanger linings Trough / distribution linings for conveying aluminium Fire protection systems Heat shields for personal protection Flare stack linings Refractory backup for brick & castable |
|
Insulfrax Bulk Fiber
|
|
Description |
Insulfrax Bulk Ceramic Fiber is the basis for the Insulfrax family of products. Insulfrax is a revolutionary breakthrough in insulating materials technology. |
| Specifications | Colour..........Blueish White Classification temperature....1100 degC Melting Point > 1330 degC Fiber Diameter 3.2 microns |
| Packaging | 20 kg bags, other sizes on request |
| Typical Applications | Textile manufacture Chimney Fill. Fire door infill |
|
Anchor-Loc and Prismo
Modules
|
|
Description |
Anchor-Loc (module with central fastener suitable for small furnaces and finishing rows in lining made from Prismo modules) and Prismo modules (characterised by its 3 point fastening system) are prefabricated modular units comprising of a single roll of needled Fiberfrax Durablanket folded to a specified thickness and compression. |
| Availability | Standard Module is 305mm x 305mm, thicknesses available from 100mm to 300mm, special shapes and sizes available subject to order. |
| Typical Applications | Industrial furnace linings (roofs, walls & doors) Thermal insulation of ladle and turndish preheat covers. Thermal insulation of incineration equipment. |
|
Fiberfrax Paper
|
|
Description |
Fiberfrax Papers are manufactured using expert non-woven technology and offer exceptional insulating performance and flexibility. Advanced production techniques ensure a highly uniform structure characterised by low thermal conductivity, good handling strength and a smooth surface. |
| Product range |
DS Paper: DS Paper is made from washed Fiberfrax fibers wherein the unfiberised shot is removed. The product is noted for having exceptionally low thermal conductivity and good handling properties. Its smooth surface provides advantages in seal, gasket and spacer applicatons. DS paper contains a small amount of organic binder for increased handling strength. FT Paper: FT Paper is a free thickness paper made from unwashed high purity Fiberfrax ceramic finers. Its higher density and binders give performance properties ideal for most refractory applications. 110 Paper: This is a clay filled, sheeted ceramic fiber paper which is denser and more rigid than other standard grade products. The rigidity is maintained even after burnout of the organic bonding agents. The good dielectric, compression resistance, and die cutting characteristics of 110 paper are advantageous in many high temperature gasketing applications. 880 Paper: 880 paper is made from a higher alumina content, shorter, smaller diameter fiber and laid up at higher densities. Thes product parameters lead to reduced shrinkage, higher strength, an increased operating temperature range and better chemical resistivity. This product is used in applications where the service life of standard ceramic fiber papers are reduced. 970 Paper: 970 Paper is amde from high purity Fiberfrax washed fibers. During the manufacture of this product, large portions of the unfiberised particles in the bulk fiber are removed prior to proper lay up. |
|
Fiberfrax Coating Cements
|
|
Description |
Fiberfrax QF150 and QF180 have been specially formulated to provide air setting refractory coatings or bonding agents that are resistant to flame and hot gas gas erosion. Fiberfrax coating cements form a hard insulation surface with excellent chemical resistance that is not wetted by most non-ferrous molten metals. Excellent thermal reflectance and dialectric strength properties also enable these cements to be used for a wide range of applications, particularly with other Fiberfrax and Insulafrax product forms.
|
| Typical Physical Properties | Colour: QF150 White paste QF180 Green paint Continuous use temp:1260degC Normal shelf life > 1 year |
| Packaging |
QF150 4 & 20 litre pails QF180 1, 4 & 20 litre pails |
|
Fiberstick Topcoat M
|
|
| Description |
Fiberfrax TopCoat M is a mixture of high temperature mullite refractory reinforced with Fibermax Fibers designed as a high temperature coating for Fiberfrax ceramic fibers. TopCoat M provides an excellent resistance to slag, alkali attach and air velocity erosion attack when applied over ceramic fiber modular linings or flatwall systems.
|
| Physical Properties | Colour: Grey-White Continuous use Limit 1540 degC Linear shrinkage 24 Hour Soak (1427c) 0.3% Normal layer thickness 2.2 kg/m2 |
| Packaging | 20kg containers (dry) |
| Typical Applications | Flame resistant coating on ceramic fibers in high temperature
furnaces. Slag resistant coating on ceramic fibers in flue gas ducts. Coating
ceramic fiberboards and paper on radiant shields. |
|
Fiberfrax LDS Moldable
|
|
| Description |
Fiberfrax LDS Moldable is a versatile insulation product used as cast shapes, coatings, linings and for general refractory repairs. It consists of Fiberfrax ceramic fibers dispersed in a very sticky water based refractory silica binder requiring only drying to produce a hard surfaced, low thermal conductivity insulation. The tackiness provides good wet adhesion of the Fiberfrax LDS Moldable to the applied surface during drying, therby assuring a good refractory bond.
|
| Physical Properties | Colour: White Continuous use Limit 1260 degC Percent Solids 55% Dried Density 640 kg/m3 Normal shelf life 12 months |
| Packaging | 1, 4 & 20kg drums |
| Typical Applications | Hot and cold patching of refractory cracks and fissures. Trough
linings for aluminium and other non-ferrous metals. Coating for metal liners.
Turbine and exhaust insulation. Patching around burner blocks. Metal and
spot welding. Brazing and spot welding protection. Refractory anchor insulation. |
|
Fiberstick Pumpable &
Pumpable 1400
|
|
| Description |
Fiberfrax Pumpable and Pumpable 1400 is a versatile insulating putty-like material, which can be pumped easily and quickly into hot spots in furnace casings, door jambs, expansion joints or areas difficult to access by other techniques. Fiberfrax Pumpable has been designed to be applied using conventional pumping systems into voids or cracks, even while the furnace is still operating. Air drying results in a strong, lightweight structure with excellent insulation properties. Fiberfrax pumpable is suitable for a wide range of applications, particularly in furnace casing or refractory lining repairs
|
| Physical Properties | Colour: Off white Continuous use Limit 1260 & 1400 degC Wet density 1200 kg/m3 Dry density 400 kg/m3 Melting point 1760/1740 deg C |
| Packaging | 2kg plastic sleeves, 4 & 20kg containers |
| Typical Applications | Fiberfrax Pumpable can be used for hot or cold patch repairs
of boiler insulation. Hot or cold repair of refractory backup insulation.
Furnace door frame and jamb seals. Insulation of furnace penetrations. Caulking
of refractory cracks and expansion joints |
|
Fiberstick Variform
|
|
Description |
Fiberfrax Variform is made from Fiberfrax Bulk Ceramic Fibers and inorganic hydraulic setting binders. Variform is a casting material that is applied to areas such as furnace access doors, tube sheets, and behind refractories in aluminium transfer ladles, ladle covers and launders.
|
| Physical Properties | Colour: Tan (dry) Continuous use Limit 1200 degC Dry Density 900 kg/m3 Melting point 1760 degC Fiber diameter 2-3 microns |
| Packaging | 25kg (dry) bags |
| Typical Applications | Fiberfrax Variform can be used as backup insulation, ladle
backup insulation, Induction furnace insulation, Furnace door insulation,
backup for launder installations. |
|
Fiberstick Cement
|
|
| Description |
Fiberfrax Fiberstick cement is a high temperature, air settling cement. Fiberstick is specially formulated for use with Fiberfrax Durablankets and felts. The adherence of Fiberstick to ceramic fiber insulation products sets it apart from standard 1650 degC refractory cements.
|
| Physical Properties | Colour: Grey-Brown Continuous use Limit 1650 degC Consistency (as shipped) Trowelling Bulk density (as shipped) 2300 kg/m3 Normal shelf life 9 months Normal joint thickness 3.2mm |
| Packaging | 25kg drums |
| Typical Applications | Fiberstick can be used to attach bonded modules to brick,
plastic, rammed or castable refractories |
|
Welding Blankets
|
|
Description: |
Fabrics, Woven glass fibre & silica cloth
Thermal protection fabrics, uses include welding blankets, fume & heat curtains.
|
| Specifications | Available standard in 900x1800 and 1800x1800mm. We can also fabricate to suit your specific requirements |
|
Armasil Sleeving
|
|
|
Description
|
Armasil sleeving can be manufactured to any size and length to suit any application. Silica sleeving is designed to provide thermal insulation for extreme temperatures. This is an ideal product to cover hydraulic hose.
|
| Physical Properties | Coating....Silicone, Abrasion resistant Colour......Red/Orange Nominal thickness 1.5mm Temperature rating - 1200°c Size - std roll length 15m though can be cut to size |
|
Sleeving for thermal and
abrasion protection
|
|
|
Description
|
Sleeving / Tubing
|
| Applications: | Protection from heat and molten metal splash
and sparks. Also provides abrasion resistance. For protection of pipes,
hose and cables. Suitable for temperatures up to 538 degC Silicon finish 238degC |
|
Fibreglass lagging, ladder
tape and standard fibreglass tape
|
|
Description |
FGR / FGW Fibreglass rope and Fibreglass webbing has many uses
including shipping, marine and boiler. This product can be used for oven
joints, pipe lagging or wrapping and duct flange seals. |
| Physical Properties |
These webbing products have a maximum temperature of 538 degC, available in 1.5mm thick (widths of 25, 40 and 50mm) 3.0mm thick (widths of 25, 40, 50, 75, 100 & 150mm thick and 6.0mm thick (widths of 25, 40, 50, 75, 100 & 150mm thick) The rope products have a maximum temperature of 538 degC and are available
in 12.5, 15, 20, 25, 30, 40 & 50mm diameter rolls |
|
Tadpole tapes and fabricated
seals
|
|
|
Description
|
Manufactured from either continuous filament glass, ceramic, aramid or oxidised specialty yarns. Specific weave types and cores are offered to provide flexibility, robustness and recovery. Various coatings or treatments, including graphite and silicone are offered to improve stability and reduce the effects of high temperature and abrasion. |
| Physical Properties |
Available in various diameters, tails and configurations, a safe way to replace asbestos on oven doors
|
For price and availability of your thermal requirements please email Procureit today!
|
Procureit Australia Pty Ltd |
 |
* 2-3 working days to approved customers providing the item
is available in the Brisbane metropolitan area on the day of order and subject
to transport.
All brand name, images and logos depicted are property of their respective trademark
owners.
thermal supplies, calcium aluminate cement, thermal insulation, fabricated insulation products, gaskets, packings & seals, composite materials, steam & boiler products, heat resistant materials, ceramic & fibreglass products, expansion joints & hose assemblies, thermal & electrical insulation, industrial materials
